Mounts and Brackets

Classic short-frame models

Mounts and Brackets

Postby Zaemo » Mon May 16, 2016 5:53 pm

Hello, gents.
I have decided to reproduce the 52-58 lock and light cylinder mounts and retaining clips. (71620-52 and 71621-52) They are about done being stamped as original. The drawings look excellent but I haven't held any parts in my hand yet. I'm having them cad plated with the exception of a smaller number of the retaining clip done in park. I have surmised that they were parkerized early on and switched to cadmium at some point. The NOS clip that sold on eBay a while back was cad. They can't be seen when installed so I'm not going to fixate.

I have found that there are a couple more hard to find brackets that I may reproduce depending upon how this project goes. I am open to suggestions but I have found the following to be difficult to find and not reproduced. The parts that cover more years would get priority.

27448-57 Throttle Control Coil Bracket - 57 up

38676-52 Control Coil Bracket - Frame Mount 52 up

69029-57 Horn Trumpet Mount Bracket 57-64

56628-57 Horn Mount Timer Control Coil Bracket 57-64

I will follow up on the current project.

Z
Zaemo
 
Posts: 142
Joined: Wed Dec 17, 2014 2:31 pm

Re: Mounts and Brackets

Postby Magneto Sportster » Mon May 16, 2016 9:37 pm

27448-57 is available from Old Dude...at least it used to be

38676-52 are very hard to find these days...I would definitely take a few
Magneto Sportster
 
Posts: 107
Joined: Tue Apr 15, 2014 8:41 pm

Re: Mounts and Brackets

Postby Zaemo » Tue May 17, 2016 12:05 am

Old Dude does not have that bracket which is why it's on my list. I will ask again to make sure. Thanks!
Z
Zaemo
 
Posts: 142
Joined: Wed Dec 17, 2014 2:31 pm

Re: Mounts and Brackets

Postby GaryM2 » Wed Dec 28, 2016 9:40 pm

Hi Zaemo,

Any progress on new reproduction of these parts:

69029-57 Horn Trumpet Mount Bracket 57-64

56628-57 Horn Mount Timer Control Coil Bracket 57-6
User avatar
GaryM2
 
Posts: 87
Joined: Mon Sep 05, 2016 9:41 am
Location: WI

Re: Mounts and Brackets

Postby Zaemo » Thu Jun 22, 2017 10:01 pm

GaryM2 wrote:Hi Zaemo,

Any progress on new reproduction of these parts:

69029-57 Horn Trumpet Mount Bracket 57-64

56628-57 Horn Mount Timer Control Coil Bracket 57-6


Gary, these are under way.

Chad
Zaemo
 
Posts: 142
Joined: Wed Dec 17, 2014 2:31 pm

Re: Mounts and Brackets

Postby Zaemo » Wed Jul 26, 2017 6:30 pm

Got the brackets in. The timer bracket is fine but the Horn Bracket had the chamfer on the wrong side. It will be a couple more weeks and they will go out for plating.

Z
Zaemo
 
Posts: 142
Joined: Wed Dec 17, 2014 2:31 pm

Re: Mounts and Brackets

Postby Zaemo » Sat Aug 26, 2017 2:23 am

Brackets are in. I need to finish each one by hand before cad plating. Unfortunately I'll be overseas for three weeks which also means I won't make Davenport, dammit.
Z
Attachments
IMG_6559 (1).jpg
IMG_6559 (1).jpg (18.36 KiB) Viewed 16487 times
Zaemo
 
Posts: 142
Joined: Wed Dec 17, 2014 2:31 pm

Re: Mounts and Brackets

Postby 55panman » Sat Aug 26, 2017 10:34 am

Zaemo, do you have a catalog of the parts you have available? Thanks, Ron
55panman
 
Posts: 162
Joined: Wed Oct 28, 2015 4:16 pm

Re: Mounts and Brackets

Postby Zaemo » Sun Aug 27, 2017 5:45 am

Hi Ron,
I do not make enough parts to warrant a catalog. Maybe a small leaflet. ?

The only parts I make so far are the above horn and timer bracket and the lock cylinder brackets. I'm working on a couple more helpful things I hope to get together later in the year.

Thanks for asking,

Chad
Attachments
IMG_3590 (1).jpg
IMG_3590 (1).jpg (454.63 KiB) Viewed 16423 times
Zaemo
 
Posts: 142
Joined: Wed Dec 17, 2014 2:31 pm

Re: Mounts and Brackets

Postby sezme » Tue Sep 05, 2017 9:45 pm

Zaemo,

I desperately need a Horn Trumpet Mount Bracket for my 57. It doesn't need to be plated. Is there something we can do to make this happen?

Stu

[email protected]
sezme
 
Posts: 3
Joined: Fri Feb 19, 2016 5:23 pm

Next

Return to 1957 to 1969

Who is online

Users browsing this forum: No registered users and 13 guests