by jOe » Mon Jun 19, 2017 9:27 am
I'm not sure if I'll have to pull it. The situation is, the cover and generator came off a '65 XLCH motor, and I'll be putting them on another '65 XLCH motor. I don't remember if the generator had an oil slinger or a washer on the end of the shaft.(I'm away from home now and can't check). The other cover I have is a later ('68<) one with the conical type separator. Depending on what's on the end of the generator shaft, I may need to switch them.
That being said, the generator and cover in question were on a running motor together, so whatever the case parts-wise, the combination was compatible.