by tator » Thu Dec 13, 2018 8:36 pm
Thank you very much, you guys rock! I have been looking for this information for two weeks, on the Antique Motorcycle Forum and on the Sportster Forum. No one would answer. I have a set coming back from the chromers tomarrow , I am within a 1/16 of an inch of the measurement. Mine are 5 1/2 inches long. Hopefully when they come back with chrome they will be that 1/16". One of the things that I found out while making these, it is a design that will fail. And I guess that is why a lot of them are missing. The two 8-32 screws that hold these in place make these so they bend very easy. If they get out of alignment they can rub the fork. Now in one of my pictures, there is a piece of tubing that is 1 1/4 inch long that I welded in the big hole. That tubing fits snug on the fork tube and they cannot get out of alignment. Thanks again. Terry