KR,KRTT, XLRTT frames

Racing K Models

KR,KRTT, XLRTT frames

Postby hugoct » Sun Jul 21, 2019 8:13 am

Notes from the Race Department, 1967
47006-52R Frame 32 pounds (used on KR and KRTT 1952 through 1957 and all XLRTT)
47006-58R Frame 27 pounds (used on KR and KRTT 1958 through 1969)
47462-54R Rear Section, Long 13 pounds
47462-60R Rear Section, Long (light) 10 pounds
Last edited by hugoct on Sun Jul 21, 2019 2:09 pm, edited 1 time in total.
hugoct
 
Posts: 201
Joined: Sat Jul 07, 2018 9:51 am

Re: KR,KRTT, XLRTT frames

Postby hugoct » Sun Jul 21, 2019 2:06 pm

Beau, The information I provided came from a former staff member of the racing department. I have two hi boys (both Fred Nix) and one lo boy (Roger Reiman) but doubt I will be stripping them to weigh them. If anyone else wants to do that with theirs that would be great. :)
hugoct
 
Posts: 201
Joined: Sat Jul 07, 2018 9:51 am

Re: KR,KRTT, XLRTT frames

Postby hugoct » Tue Jul 23, 2019 9:21 pm

Beau,
We have Leo Hulnik to thank for this information
1952-69 Stock KRTT/XLRTT swingarm 10.1 Lbs
1966-7 High Boy frame w/o swingarm 28 Lbs
1967-9 Low Boy frame w/o swingarm 18 Lbs
1966-9 High boy/Low Boy swingarm 8.9 Lbs
hugoct
 
Posts: 201
Joined: Sat Jul 07, 2018 9:51 am

Re: KR,KRTT, XLRTT frames

Postby xlh59 » Sat Jul 27, 2019 9:15 am

My KR/XLR frame with 58R neck weights 30.5 lbs, slightly lightened, so ist seems to be a "late" 52R frame
My XRTT frame weights 19.5 lbs, it seems to be a later frame, as it uses a -67 tomohawk casting and a square tube swingarm. The swingarm weights 7.5 lbs ...
xlh59
 
Posts: 125
Joined: Fri Oct 27, 2017 2:12 pm
Location: Germany

Re: KR,KRTT, XLRTT frames

Postby hugoct » Sat Jul 27, 2019 9:57 pm

Are you sure it isn't a 57R casting number?
If that's the case, based on the weight it would be an XLRTT frame.
Factory issue XRTT frames did not use the 67 pivot casting.
They made 51 in 1972 and still had some laying around at the factory in the 1980s.
All Alloy XRTT frames had round swing arms
There are two versions of the Alloy XRTT swingarm both with round tubing.
hugoct
 
Posts: 201
Joined: Sat Jul 07, 2018 9:51 am

Re: KR,KRTT, XLRTT frames

Postby xlh59 » Sun Jul 28, 2019 4:55 am

You are completely right about the 57R Neck, mixed that up. The frame has also a stamped steel top Motor mount. I will post Pictures soon.

The XRTT frame is definately not 72, but seems to be quite authentic. It came with Morris wheels, Tank, Cerianis and CB disc brakes:
P1070155.jpg
P1070155.jpg (35.31 KiB) Viewed 16010 times

The Seat is aftermarket und the shocks just for the First assembly ... this picture is 10years old.
xlh59
 
Posts: 125
Joined: Fri Oct 27, 2017 2:12 pm
Location: Germany

Re: KR,KRTT, XLRTT frames

Postby hugoct » Sun Jul 28, 2019 7:41 am

The XRTT frame continued in production by various parties after Harley Davidson's initial run of 51.
You can still buy one from some people today.
The better replicas use the 52 pivot casting as the original print calls for.
None were manufactured by Harley's source with a 67 pivot casting.
There were no square section tubing swingarms.
It looks like a nice frame.
It's just not an original.
There are far more XRTTs today then ever left Nichols Engineering or the Factory Race Department.
Last edited by hugoct on Sun Jul 28, 2019 2:37 pm, edited 1 time in total.
hugoct
 
Posts: 201
Joined: Sat Jul 07, 2018 9:51 am

Re: KR,KRTT, XLRTT frames

Postby DaveC » Sun Jul 28, 2019 9:52 am

I sent you a PM. Thanks Dave C
DaveC
 
Posts: 107
Joined: Wed Jul 09, 2014 10:08 pm
Location: California

Re: KR,KRTT, XLRTT frames

Postby hugoct » Sun Jul 28, 2019 2:36 pm

Dave C
I have never been able to respond to PMs
Please call 817 403 7944
hugoct
 
Posts: 201
Joined: Sat Jul 07, 2018 9:51 am


Return to KR, KRM, KRTT, KHR, KHRM, KHRTT

Who is online

Users browsing this forum: No registered users and 11 guests