nylon spacer washers for toolbox / battery cover

Production K Models

nylon spacer washers for toolbox / battery cover

Postby Coolbreeze » Mon Jul 04, 2022 7:17 pm

KHK toolbox, battery cover w marks.jpg
KHK toolbox cover from parts book
KHK toolbox, battery cover w marks.jpg (247.01 KiB) Viewed 2173 times
I like using nylon type washers to separate the shells of the toolbox and battery cover (see blue arrows) and to keep the wingbolts from damaging the paint on the toolbox. I found what I need through scrounging; however, a few extras would be handy. By my reckoning, they should be black w/ 0.3125" (0.79cm) ID and 0.625 (1.59cm) outside diameter.
Where might I find these items?
User avatar
Coolbreeze
 
Posts: 42
Joined: Tue May 01, 2018 12:44 am

Re: nylon spacer washers for toolbox / battery cover

Postby wz507 » Mon Jul 04, 2022 8:26 pm

You might find something here that could be trimmed/adapted for your needs.

https://www.mcmaster.com/washers/system ... washers-9/
User avatar
wz507
 
Posts: 356
Joined: Fri Dec 11, 2015 9:13 pm

Re: nylon spacer washers for toolbox / battery cover

Postby Rubone » Tue Jul 05, 2022 9:59 pm

Your local hardware store should have lots of nylon washers in the nut/bolt department.
Rubone
 
Posts: 117
Joined: Thu Oct 26, 2017 6:48 pm


Return to K, KK, KH, KHK

Who is online

Users browsing this forum: No registered users and 13 guests

cron