Page 1 of 1

nylon spacer washers for toolbox / battery cover

PostPosted: Mon Jul 04, 2022 7:17 pm
by Coolbreeze
KHK toolbox, battery cover w marks.jpg
KHK toolbox cover from parts book
KHK toolbox, battery cover w marks.jpg (247.01 KiB) Viewed 542 times
I like using nylon type washers to separate the shells of the toolbox and battery cover (see blue arrows) and to keep the wingbolts from damaging the paint on the toolbox. I found what I need through scrounging; however, a few extras would be handy. By my reckoning, they should be black w/ 0.3125" (0.79cm) ID and 0.625 (1.59cm) outside diameter.
Where might I find these items?

Re: nylon spacer washers for toolbox / battery cover

PostPosted: Mon Jul 04, 2022 8:26 pm
by wz507
You might find something here that could be trimmed/adapted for your needs.

https://www.mcmaster.com/washers/system ... washers-9/

Re: nylon spacer washers for toolbox / battery cover

PostPosted: Tue Jul 05, 2022 9:59 pm
by Rubone
Your local hardware store should have lots of nylon washers in the nut/bolt department.