Page 1 of 1

1956 KHK Exhaust Muffler Support

PostPosted: Thu May 18, 2023 5:35 am
by Renshaw
Hi all
I am looking for the muffler support bracket for 56 KHK part no 65316-52
I have some questions that I would be grateful if anyone here can answer:
This part no was replaced in with a -56 part no.. Im aware that the 56 frame is different from the 52 frame - the 56KHK uses which support bracket? -52 or -56?
How can I tell the difference between the 2 if Im looking on something like ebay?
Will either work in fact?
Anyone have one they wish to sell?
Many thanks

Re: 1956 KHK Exhaust Muffler Support

PostPosted: Thu May 18, 2023 8:18 am
by JerrryR
57PB Mufflers.jpg
57PB Mufflers.jpg (114.34 KiB) Viewed 82904 times

Re: 1956 KHK Exhaust Muffler Support

PostPosted: Thu May 18, 2023 7:30 pm
by hennesse
Here is a little chart I threw together showing the support tubes from the parts books. Not to scale! But you can see the different shapes.

exhaust.jpg
Support tube comparison
exhaust.jpg (50.28 KiB) Viewed 82648 times


The tubes that share a drawing (like 65513-52 and -57) are not the same, there is some subtle difference between them. Sorry, but I do not know any more. Jerrrrrry - do you know the difference between the -52 and -57 ?

Over in the Technical section, there is a good article about Exhaust Systems !

Re: 1956 KHK Exhaust Muffler Support

PostPosted: Thu May 18, 2023 10:25 pm
by Simon
There is also 65530-53 which I believe is used by the KR and 58 XLCH with straight pipes - looks like the -58 bracket in the illustration above...

Re: 1956 KHK Exhaust Muffler Support

PostPosted: Fri May 19, 2023 1:22 am
by Renshaw
Thanks all, I obviously came to the right place.

Re: 1956 KHK Exhaust Muffler Support

PostPosted: Fri May 19, 2023 9:33 am
by hennesse
Simon wrote:There is also 65530-53 which I believe is used by the KR and 58 XLCH with straight pipes - looks like the -58 bracket in the illustration above...


Oops! My mistake. Maybe I should put my glasses on. The 65530-58 does NOT exist - it's really 65530-53. I corrected the image in my earlier post.

Thanks for catching me!
Dave

Re: 1956 KHK Exhaust Muffler Support

PostPosted: Fri May 19, 2023 9:55 pm
by JerrryR
Screenshot 2023-05-19 205223.jpg
Screenshot 2023-05-19 205223.jpg (128.45 KiB) Viewed 82734 times

Re: 1956 KHK Exhaust Muffler Support

PostPosted: Fri May 19, 2023 10:13 pm
by hennesse
[quote="JerrryR"] confusing photo {/quote]

Jerrry - execrise them fingers and tell us what's which in the photo!

Re: 1956 KHK Exhaust Muffler Support

PostPosted: Fri May 19, 2023 11:31 pm
by JerrryR
Top to bottom, 57, 52, 53.

I don't have the -52 hanger dimensioned but I do the -57. This might help a little with telling the difference between them. The -52 hanger has a much greater offset than the -57.

-57 Hanger Dimensioned.jpg
-57 Hanger Dimensioned.jpg (100.25 KiB) Viewed 82722 times

Re: 1956 KHK Exhaust Muffler Support

PostPosted: Sat May 20, 2023 12:22 pm
by hennesse
[quote="JerrryR"]Top to bottom, 57, 52, 53.

Jerry, you have the years on the far right of your photo - I couldn't see them unless I made my browser window really wide. Maybe others have this problem, so I redid your photo slightly. The difference between the -52 and -57 is tremendous, and is now quite obvious. Thank you for your tremendous efforts!!!

exhaust-comparison.jpg
Support tube comparison (reworked)
exhaust-comparison.jpg (103.6 KiB) Viewed 82674 times